WARRANTY & SUPPORT - FAQ's

The TV cannot detect any signals from any input terminals. Check if the cable is connected correctly and firmly. Check if the power of any external equipment is turned on. Check if the input source selection is correct.

Check if the display resolution and frequency from your PC is a valid mode for the TV. Refer to the recommended RGB input signal chart.

Adjust the "H Position" and "V Position" in the Picture menu.

Check if the antenna connect and direction, also please engage in fine tuning the TV. The TV station may have broadcasting difficulties, try another channel.

Check to see if the main power of the TV is turned on, also check the connection of the power cord and/or other cables.

Please check the volume level, also check if the mute button has been pressed or not, or check the connection of the external equipment.

Check the value of "brightness", "Contrast" and "Colour" in Picture menu.

Check if the batteries are installed correctly, The batteries may be exhausted, replace them with new batteries. Remove all obstruction between the remote control and the remote control sensor. Ensure there is no strong light shinning on the remote sensor.

Check the antenna connection, The TV station may have broadcasting difficulties, try another channel.